Buffalo Tech LPV3-USB-TX1 Manuel d'utilisateur télécharger pdf (Page 2)

Insert the included CD into a CD-ROM Drive.

Run the setup.exe program found on the root of the CD. This can be

done by browsing to the CD or by going to the ‘Start Menu’, selecting

‘Run...’ , and typing x:\setup.exe (Where x is the drive letter of the

CD-ROM Drive), then press the ‘OK’ button.

The Install Shield Wizard for LPV3 Manager will open up.

Press the ‘Next’ button.

Connect the USB Print Server into

the included AC Adapter power cord,

and attach the power cord to a power outlet.

Connect the included standard patch cable from the USB Print Server

to a switch, hub, or router on your network.

Connect the included USB A-to-B cable to the USB Print Server and

the USB Printer. Visually inspect all connections and verify that they

are secured.

Setup

The setup of the USB Print

Server is performed using

the following steps:

Software Installation - Windows Based PC’s

*Macintosh Procedure on Page 19*

This section describes how to properly install and use the USB Print

Server conﬁguration software. Please follow the following steps to

properly install the software:

1 2 3 4 5 6 7 ... 23 24

Pas de commentaire

Buffalo Tech LPV3-USB-TX1 Manuel d'utilisateur Page 2